Control box for leak testing system

 

 
control box for leak test process

TNPE-I
Control box for bench and leak test machine.
Electronic measure and displaying test values.
Desk operator LCD, 20 specific checking routines.
Adaptable on old machine.
   
TnPE-I
Principle of detection  
pressure decay or pressure increase
Technology sensor  
piezoresistive
Response time sensor  
2ms
Range of proving pressure  
-101kPa < > 0kPa
0kPa < > 100kPa
0kPa < > 1MPa
Number of measurement ways  
1 to 8
Typical diameter of detected hole(1)  
0,1mm
Number of programs  
20
Operating modes  
Production
Calibration
Parameter setting
Meters of results  
2 GOOD/BAD meters per program
PC interface (option)  
RS 232 (with Xrecord software)
Print results (option)  
Serial printer
Voltage source  
100 to 240 Vac
Electric power  
maximum 100W
   

(1): the equivalent diameter hole of detectable air leak is related to the allocated search time (but not in a linear way); to detect a diameter of hole 2 times smaller, about 4 times more time is needed.
Home | History | Leak Tester | Packing Machine | Jobs | Acces | Contact & Mails
Coprosud © 2006 - Design by HP