In-line Leak detector for flexible package

 

 

In-line Leak detector for flexible package

TnPS-CH
Dynamic leak tester for flexible package: sachets, bags, pouches, sealed with unspecified atmosphere.
Dynamic sensor heads during the test, fixed on mobile carriage ("Brushless" motorization), which combine the flexibility of linear machines at the great rate of rotary machines.
Electronic measure and displaying test values.
Desk operator LCD, 20 specific checking routines.
Adjustment of height and width per bag type.
Frame with or without conveyor, for assembly on present line .

   
TnPS-CH
Principle of detection  
pressure decay
Technology sensor  
piezoresistive
Response time sensor  
2ms
Range of proving pressure  
0kPa < > 100kPa
Typical diameter of detected hole (1)  
0,2mm
Number of programs  
20
Operating modes  
Production
Calibration
Parameter setting
Meters of results  
2 GOOD/BAD meters per program
PC interface (option)  
RS 232 (with Xrecord software)
Print results (option)  
Serial printer
Voltage source  
240 Vac
or 3x380Vac + N
Electric power  
2 kw maximum
Materials frame  
anodic aluminum or stainless 304L
Option  
Self-calibration
   

(1) : the equivalent diameter hole of detectable air leak is related to the allocated search time (but not in a linear way); to detect a diameter of hole 2 times smaller, about 4 times more time is needed.

Coprosud © 2006 - Design by HP