Leak detector for filled bottle

 

 
Leak detector for filled bottle

T1VE-S "LEAK TRACKER"
Machine for air leak test of filled bottles, control the seal of the gas zone (atmospher or modified) above liquid.
Manual loading, automatic test cycle.
Measure electronic and displaying test values.
Desk operator LCD, 20 specific checking routines.
   
T1VE-S
Principle of detection  
vacuum + increase pressure
Technology sensor  
piezoresistive
Response time sensor  
2ms
Range of proving pressure  
-101kPa < > 0kPa
Typical diameter of detected hole (1)  
50 microns
Maximum format bottle (H X L)  
350x150 mm
Maximum rate (cycles/min)  
2
Number of programs  
20
Operating modes  
Production
Calibration
Parameter setting
Meters of results  
2 GOOD/BAD meters per program
PC interface (option)  
RS 232 (with Xrecord software)
Print results (option)  
Serial printer
Voltage source  
240 Vac
Electric power  
1,5 kw maximum
Length machine  
500 mm
Width machine  
500 mm
Height machine  
1300 mm
Vacuum pump included  
3 m3/h
   

(1) : the equivalent diameter hole of detectable air leak is related to the allocated search time (but not in a linear way); to detect a diameter of hole 2 times smaller, about 4 times more time is needed.

Download the printable version of the presentation: Leak Tracker.pdf
Home | History | Leak Tester | Packing Machine | Jobs | Acces | Contact & Mails
Coprosud © 2006 - Design by HP